Flush Head Studs
Studs that press in flush, M2 to M8, lengths 5 to 50 mm.
Self-Clinching & Weld Fasteners
Thin Sheet Studs
Flush studs for very thin sheet metal.
- Section
- Self-clinching
- Type
- Studs & pins
Overview
Thin sheet studs are designed for sheet thinner than a standard flush head stud allows, while still giving a permanent threaded stud.
Full dimensions, preferred lengths and installation / push-out / torque-out performance data are shown in the datasheet below, taken from the self-clinching fasteners catalogue.
Specifications
| Part numbers | KB-TFH, KB-TFHS |
|---|---|
| Zinc Plated Steel | KB-TFH |
| Stainless Steel | KB-TFHS |
| Sizes | M3, M4, M5 |
| Sheet hardness (KB-TFH) | HRB 80 or less |
Datasheet
Dimensions, preferred lengths and performance data from the self-clinching fasteners catalogue.
Key features
- For very thin sheet
- Steel and stainless
- Flush head
Applications
Thin enclosuresElectronicsAppliancesCovers
Need a size, grade or finish not listed?We also supply special and non-standard parts to drawing.Send enquiry
More self-clinching
Flush Head Pins
Unthreaded locating pins with a flush head, 3 to 6 mm.
High Strength Studs
Hex-head clinch studs for high torque, M5 to M10.
High Strength Studs for Thin Sheets
High-strength studs designed for thin sheet metal.
Low Displacement Flush Head Studs
Flush studs that disturb the sheet very little, close to edges.
Concealed Head Studs
Studs fitted into a blind hole so the reverse side stays untouched.