Flush Head Studs
Studs that press in flush, M2 to M8, lengths 5 to 50 mm.
Self-Clinching & Weld Fasteners
High Strength Studs for Thin Sheets
High-strength studs designed for thin sheet metal.
- Section
- Self-clinching
- Type
- Studs & pins
Overview
These high strength studs combine high push-out and torque-out with a design for thin sheet, where a standard high strength stud would not fit.
Full dimensions, preferred lengths and installation / push-out / torque-out performance data are shown in the datasheet below, taken from the self-clinching fasteners catalogue.
Specifications
| Part numbers | KB-HFE |
|---|---|
| Zinc Plated Steel | KB-HFE |
| Sizes | M5, M6, M8 |
Datasheet
Dimensions, preferred lengths and performance data from the self-clinching fasteners catalogue.
Key features
- High strength in thin sheet
- Zinc plated steel
- Permanent installation
Applications
Thin-gauge enclosuresAppliancesAutomotive panelsElectronics
Need a size, grade or finish not listed?We also supply special and non-standard parts to drawing.Send enquiry
More self-clinching
Flush Head Pins
Unthreaded locating pins with a flush head, 3 to 6 mm.
High Strength Studs
Hex-head clinch studs for high torque, M5 to M10.
Low Displacement Flush Head Studs
Flush studs that disturb the sheet very little, close to edges.
Concealed Head Studs
Studs fitted into a blind hole so the reverse side stays untouched.
Thin Sheet Studs
Flush studs for very thin sheet metal.