Flush Head Studs
Studs that press in flush, M2 to M8, lengths 5 to 50 mm.
Self-Clinching & Weld Fasteners
Broaching Studs
Studs for PCBs and soft materials, tin-plated phosphor bronze.
- Section
- Self-clinching
- Type
- Studs & pins
Overview
Broaching studs install into printed circuit boards and other non-ductile materials by broaching (cutting) their own seat. Tin-plated phosphor bronze gives good conductivity and solderability.
Full dimensions, preferred lengths and installation / push-out / torque-out performance data are shown in the datasheet below, taken from the self-clinching fasteners catalogue.
Specifications
| Part numbers | KB-KFH |
|---|---|
| Electro-Tin Plated Phosphor Bronze | KB-KFH |
| Sizes | M2.5, M3, M4, M5 |
| Sheet hardness (KB-KFH) | HRB 55 or less |
Datasheet
Dimensions, preferred lengths and performance data from the self-clinching fasteners catalogue.
Key features
- For PCBs and soft materials
- Electro-tin plated phosphor bronze
- Solderable
Applications
PCB mountingElectrical terminalsElectronicsPlastics
Need a size, grade or finish not listed?We also supply special and non-standard parts to drawing.Send enquiry
More self-clinching
Flush Head Pins
Unthreaded locating pins with a flush head, 3 to 6 mm.
High Strength Studs
Hex-head clinch studs for high torque, M5 to M10.
High Strength Studs for Thin Sheets
High-strength studs designed for thin sheet metal.
Low Displacement Flush Head Studs
Flush studs that disturb the sheet very little, close to edges.
Concealed Head Studs
Studs fitted into a blind hole so the reverse side stays untouched.