Rivet Nuts (Insert Nuts)

Reduced Head Knurled Body Rivet Nut, Closed End

Reduced (thin) head, round knurled body, closed end. M4 to M12, carbon steel, zinc plated.

Section: Rivet nuts
Type: Steel rivet nuts

Overview

A rivet nut (insert nut) gives a strong, reusable thread in sheet metal, tube or plastic that is too thin to tap. It is fitted from one side with a hand or pneumatic tool. The thin reduced head sits almost flush with the panel, for a neat finish. Knurls on the body bite into a round hole to resist spinning.

The closed end seals the thread against water, dust and paint, and protects parts behind the panel. Available from M4 to M12 with grip ranges from 0.5 mm to 5 mm. Each part number covers a set range of sheet thickness and has its own overall length (L), shown in the table.

Specifications

Brand	Neufix
Part no. series	NF-RH-KBC
Threads	M4, M5, M6, M8, M10, M12
Grip range	0.5 mm to 5 mm
Length (L)	15 mm to 29 mm
Head	Reduced (thin) head
Body	Round knurled body
End	Closed end (blind, sealed)
Material	Carbon steel, zinc plated

Sizes & part numbers

Part no.	Thread	Grip range (mm)	Length L (mm)
NF-RH-KBC-0420	M4	0.5-2.0	15.0
NF-RH-KBC-0435	M4	2.0-3.5	16.5
NF-RH-KBC-0520	M5	0.5-2.0	16.5
NF-RH-KBC-0535	M5	2.0-3.5	18.0
NF-RH-KBC-0630	M6	0.5-3.0	20.5
NF-RH-KBC-0645	M6	3.0-4.5	22.0
NF-RH-KBC-0830	M8	0.5-3.0	23.0
NF-RH-KBC-0845	M8	3.0-4.5	24.5
NF-RH-KBC-1030	M10	1.0-3.0	24.5
NF-RH-KBC-1050	M10	3.0-5.0	26.0
NF-RH-KBC-1240	M12	1.0-4.0	29.0